Brock I believe .88 center to center is absolute min. with m6-mini's. That would be touching tuner to tuner If I was trying to keep every thing compressed as much as possible I would use .9375 ot 1.00 hope this helps
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Shaller mini’s http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=2164 |
Page 1 of 1 |
| Author: | Brock Poling [ Mon Jun 13, 2005 1:16 am ] |
| Post subject: | |
What are you guys using for string spacings for Schaller mini's (3L / 3R). I am building a guitar for a guy and he wanted me to change the headstock a little and now my tuners are too big. I ordered a set of Schaller mini's which I am pretty sure will work ok, but I am trying to lay out this headstock. I am just trying to think ahead while I am waiting on the postman.... |
|
| Author: | Michael Dale Payne [ Mon Jun 13, 2005 1:43 am ] |
| Post subject: | |
Brock I believe .88 center to center is absolute min. with m6-mini's. That would be touching tuner to tuner If I was trying to keep every thing compressed as much as possible I would use .9375 ot 1.00 hope this helps |
|
| Author: | Brock Poling [ Mon Jun 13, 2005 1:53 am ] |
| Post subject: | |
Great. Thanks. These are going to work fine then. I originally had these lined up for Waverly's (which are about as big as you can get. So these mini's should be perfect and not feel too cramped. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|